Opsætning og konfiguration
Changing settings
Settings and threshold values can be changed by administrators under Admin, Sensors, and then the Thresholds and Settings tabs. Please note that changes made under Settings may affect battery life, as more frequent measurements and data transmissions ...
Grouping sensors – locations
If you have many sensors, it can be a good idea to group them so that sensors located physically close to each other can also be viewed together in the system. You group your sensors by going to ADMIN, Locations. Here, click +CREATE in the upper ...
QR code
There is a QR code on every RoomAlyzer MINI and RoomAlyzer FULL. If you scan the QR code with your phone, you will instantly see an overview of the sensor’s current readings. The measurements are independent of the RoomAlyzer system, so you don’t ...
Cleaning – Setting up Email lists
RoomAlyzer can send emails to cleaning staff (or others of your choice), helping them plan cleaning schedules based on actual room usage. To create email lists, go to TOOLS > Cleaning. Under the Email Lists tab, you can define different groups – for ...
Disposal
If you need to dispose of RoomAlyzer sensors, please follow these steps: RoomAlyzer FULL and RoomAlyzer MINI: Remove the batteries and dispose of them separately at your local battery collection point. The sensor itself should be taken to a recycling ...
Creating users
You can easily create a new user in the RoomAlyzer system. Do this by selecting ADMIN, Users. On the Users page, you’ll see 4 tabs: Basic Information Settings Which locations are shown on the start page? Access Info: Usually, you only need to fill ...