Changing settings
Settings and threshold values can be changed by administrators under Admin, Sensors, and then the Thresholds and Settings tabs.
Please note that changes made under Settings may affect battery life, as more frequent measurements and data transmissions require more power. It may be a good idea to consult us before making changes here.
Please note that changes made under Settings may affect battery life, as more frequent measurements and data transmissions require more power. It may be a good idea to consult us before making changes here.
If you're in a hurry
When settings are changed, they are transferred to the sensor once every 24 hours.
If you don’t have time to wait, you can push the changes to the sensor manually by sliding the magnet along its right side until the sensor blinks blue and finishes with a long green blink.
When settings are changed, they are transferred to the sensor once every 24 hours.
If you don’t have time to wait, you can push the changes to the sensor manually by sliding the magnet along its right side until the sensor blinks blue and finishes with a long green blink.
Related Articles
Move a Sensor and Delete Data
You can edit information about your sensor by selecting ADMIN, Sensors, and clicking the pencil icon next to the sensor you want to modify. If you want to move your sensor to a new location—and wish to begin data collection from scratch—simply ...Customize your homepage
Your homepage gives you an overview of all your sensors. You can customize it to display the values most relevant to you right when you open the system. How to Customize Your Homepage Click your profile icon in the top right corner Select Settings ...Set your threshold values
RoomAlyzer sensors come with a set of factory settings. For example, the CO₂ limit is set according to the Danish Working Environment Authority’s recommendation that there should be no more than 1000 ppm (parts per million) in a room. Similarly, ...Chart report
The graph module, found under TOOLS > Graphs, allows you to display a visual comparison of two parameters of your choice using a drop-down menu. You can select from all RoomAlyzer measurement points, or compare your own data with DMI's temperature ...Renaming a sensor
Usually, you’ll only need to change the name of a sensor if it is being moved or deactivated. You can always edit your sensor’s settings by selecting ADMIN, Sensors, and clicking the pencil icon next to the sensor you want to modify. In the edit ...