Set your threshold values
RoomAlyzer sensors come with a set of factory settings. For example, the CO₂ limit is set according to the Danish Working Environment Authority’s recommendation that there should be no more than 1000 ppm (parts per million) in a room. Similarly, temperature is preset based on official guidelines, and so on.
But the point at which a value becomes critical can vary greatly depending on your specific criteria. For example, the ideal temperature in an office is different from what’s needed in a storage room or archive.
You can therefore change the threshold values for temperature, humidity, VOC, CO₂, light level, and sound level yourself.
To do this, go to ADMIN, Sensors. Then click on the sensor you want to adjust and select the Thresholds tab. Here, you can change the thresholds for all six measurement types by dragging the white circle until the values match your preferences.
To do this, go to ADMIN, Sensors. Then click on the sensor you want to adjust and select the Thresholds tab. Here, you can change the thresholds for all six measurement types by dragging the white circle until the values match your preferences.
Once you’ve set the thresholds for one sensor, you can apply the settings to your other sensors by clicking at the bottom of the page:
- Apply these thresholds to all sensors at this location
- Apply these thresholds to all sensors
Related Articles
Changing settings
Settings and threshold values can be changed by administrators under Admin, Sensors, and then the Thresholds and Settings tabs. Please note that changes made under Settings may affect battery life, as more frequent measurements and data transmissions ...Deviation report
RoomAlyzer continuously analyzes your indoor climate data to identify where values deviate from your defined thresholds. This allows you to constantly monitor your biggest indoor climate challenges. You can always access a detailed overview of your ...Types of reports from the sensors
The RoomAlyzer sensors collect a wide range of data – and you can easily configure the system to deliver reports tailored to your needs. When you click on Reports under TOOLS, you will see six tabs to choose from: Indoor Climate Report – measurements ...Deviations
The RoomAlyzer system continuously compiles statistics on which of your indoor climate values deviate from your defined thresholds. This means you can always see your biggest challenges when it comes to indoor climate. You can view your deviations by ...Creating users
You can easily create a new user in the RoomAlyzer system. Do this by selecting ADMIN, Users. On the Users page, you’ll see 4 tabs: Basic Information Settings Which locations are shown on the start page? Access Info: Usually, you only need to fill ...