Renaming a sensor

Usually, you’ll only need to change the name of a sensor if it is being moved or deactivated.

You can always edit your sensor’s settings by selecting ADMIN, Sensors, and clicking the pencil icon next to the sensor you want to modify. In the edit screen, you can enter a new name and possibly a new location. However, please note the following:

1. If you only change the name and location, all previously collected data will still be associated with the sensor. It will begin collecting data from the new location, but in the archive, the historical data will remain linked up to the date of the move.
   

1. You can also choose to delete the old data and start fresh. To do this, click the MOVE button. A dialog box will inform you that moving a sensor results in the deletion of all historical data. You will also be provided with a download link for the existing data.
   
   
2. If you wish to deactivate your sensor temporarily and use it again later, click DEACTIVATE. Deactivation also deletes all historical data, but again, you will be offered a download of the data before proceeding.
   
   
3. REMEMBER to remove the batteries from the sensor before storing it.
   

• Related Articles

• Deactivating a sensor

  You can access and edit your sensor information by selecting ADMIN, then Sensors, and clicking the pencil icon next to the desired sensor. If you need to temporarily deactivate your sensor and plan to use it again later, choose more options and click ...

• Move a Sensor and Delete Data

  You can edit information about your sensor by selecting ADMIN, Sensors, and clicking the pencil icon next to the sensor you want to modify. If you want to move your sensor to a new location—and wish to begin data collection from scratch—simply ...

• Calibration of the CO2 Sensor on RoomAlyzer FULL

  The internal CO2 sensor in the RoomAlyzer FULL is self-calibrating, so in general, you do not need to take any action. However, the sensor may lose calibration if it is subjected to impacts or vibrations, or if it has been out of operation for an ...

• Using the magnet

  The magnet has several functions. Activation The first time you use your sensor, you need to activate it using the magnet. Place the magnet on the small magnet symbol on the right side of the sensor and hold it there for a few seconds until the ...

• Mounting RoomAlyzer MINI and FULL

  How to mount your RoomAlyzer MINI or FULL The RoomAlyzer MINI or FULL should be mounted vertically on a wall. Use the included adhesive nail, and follow these guidelines to ensure optimal sensor performance: Never place the sensor in direct sunlight ...