Mounting RoomAlyzer MINI and FULL

Mounting RoomAlyzer MINI and FULL

How to mount your RoomAlyzer MINI or FULL
 The RoomAlyzer MINI or FULL should be mounted vertically on a wall. Use the included adhesive nail, and follow these guidelines to ensure optimal sensor performance:
  1. Never place the sensor in direct sunlight
  2. Avoid mounting it in corners or directly under the ceiling
  3. Ideally place it at head height (approximately 1.2 to 1.5 meters from the floor)
  4. Choose a calm, stable spot where it won’t be bumped or knocked
  5. Mount the sensor so it has a clear view of central parts of the room, such as the entrance door—this helps the built-in PIR sensor detect occupancy
  6. Keep it about 1.5 meters away from fixed seating, radiators, or ventilation outlets, as these can affect readings
  7. Do not install the sensor where it may get wet
  8. Be aware of whether you're mounting it on an interior or exterior wall, as this can influence measurement accuracy

    • Related Articles

    • Activate your RoomAlyzer

      Start by naming your device(s) Log in to our web app at app.roomalyzer.com using your agreement number, username, and password. We recommend using Google Chrome (though Safari, Edge, and Firefox also work). Click on the sensor (ID number) you want to ...

    • Calibration of the CO2 Sensor on RoomAlyzer FULL

      The internal CO2 sensor in the RoomAlyzer FULL is self-calibrating, so in general, you do not need to take any action. However, the sensor may lose calibration if it is subjected to impacts or vibrations, or if it has been out of operation for an ...

    • Change battery

      Here’s how to replace the battery in your RoomAlyzer sensors: Start by opening the RoomAlyzer by lifting the front cover. On the RoomAlyzer FULL, loosen the screw at the bottom. On the RoomAlyzer MINI, loosen the two screws in the corners. Replace ...

    • Disposal

      If you need to dispose of RoomAlyzer sensors, please follow these steps: RoomAlyzer FULL and RoomAlyzer MINI: Remove the batteries and dispose of them separately at your local battery collection point. The sensor itself should be taken to a recycling ...

    • QR code

      There is a QR code on every RoomAlyzer MINI and RoomAlyzer FULL. If you scan the QR code with your phone, you will instantly see an overview of the sensor’s current readings. The measurements are independent of the RoomAlyzer system, so you don’t ...