Change battery

Here’s how to replace the battery in your RoomAlyzer sensors:

1. Start by opening the RoomAlyzer by lifting the front cover. On the RoomAlyzer FULL, loosen the screw at the bottom. On the RoomAlyzer MINI, loosen the two screws in the corners.
   
2. Replace the batteries in the sensor.
   
3. The sensor is now operational again, but if you want to confirm that it’s active before mounting it back in place, hold a magnet against the magnet symbol on the right side of the sensor until the sensor flashes blue and ends with a single long green flash.
   
4. Now press the Status menu item. Here, you can see that the RoomAlyzer has sent data and is actively measuring.
   

Battery Types

For the RoomAlyzer FULL, we recommend Powerpac Ultra Alkaline size C – the same type that was included in the package upon delivery. Our tests show that these are the most efficient for this purpose – and even affordable!

The RoomAlyzer MINI uses special batteries that must be ordered through IoT Fabrikken at tel. +45 7171 9080 or support@iot-fabrikken.com.

The RoomAlyzer MICRO does not support battery replacement. The built-in battery has an estimated lifespan of around 8–10 years.

• Related Articles

• Disposal

  If you need to dispose of RoomAlyzer sensors, please follow these steps: RoomAlyzer FULL and RoomAlyzer MINI: Remove the batteries and dispose of them separately at your local battery collection point. The sensor itself should be taken to a recycling ...

• Changing settings

  Settings and threshold values can be changed by administrators under Admin, Sensors, and then the Thresholds and Settings tabs. Please note that changes made under Settings may affect battery life, as more frequent measurements and data transmissions ...

• Set your threshold values

  RoomAlyzer sensors come with a set of factory settings. For example, the CO₂ limit is set according to the Danish Working Environment Authority’s recommendation that there should be no more than 1000 ppm (parts per million) in a room. Similarly, ...

• Renaming a sensor

  Usually, you’ll only need to change the name of a sensor if it is being moved or deactivated. You can always edit your sensor’s settings by selecting ADMIN, Sensors, and clicking the pencil icon next to the sensor you want to modify. In the edit ...

• Indoor Climate Report

  If you have one or more rooms you want to keep a closer eye on, indoor climate reports can provide you with daily, weekly, or monthly summaries delivered directly to your inbox. The system automatically sends the reports to your email address and/or ...