Activate your RoomAlyzer

Start by naming your device(s)

1. Log in to our web app at app.roomalyzer.com using your agreement number, username, and password. We recommend using Google Chrome (though Safari, Edge, and Firefox also work).
   
2. Click on the sensor (ID number) you want to activate and allow your browser to access your location.
   
3. Next, choose a name—for example, Classroom 6.B or Meeting Room Tycho Brahe.
   
4. Then select a location or group, such as East Wing or Copenhagen.
   
5. Click Save, and the sensor will be registered. If you have multiple sensors, repeat the process for each one.
   

How to start measuring with RoomAlyzer

1. Begin by opening your RoomAlyzer MINI or FULL by lifting the front cover.
   
2. Insert the batteries into the sensor.
   
3. Then hold the included magnet against the magnet symbol on the right-hand side
   of the sensor until it blinks blue and finishes with one long green blink.
   

Note:
For brand-new sensors, it may take up to 6 seconds before the blue blink starts, and several minutes before the green blink appears.

If you have multiple sensors, repeat the process for each.

• Related Articles

• Mounting RoomAlyzer MINI and FULL

  How to mount your RoomAlyzer MINI or FULL The RoomAlyzer MINI or FULL should be mounted vertically on a wall. Use the included adhesive nail, and follow these guidelines to ensure optimal sensor performance: Never place the sensor in direct sunlight ...

• Calibration of the CO2 Sensor on RoomAlyzer FULL

  The internal CO2 sensor in the RoomAlyzer FULL is self-calibrating, so in general, you do not need to take any action. However, the sensor may lose calibration if it is subjected to impacts or vibrations, or if it has been out of operation for an ...

• Using the magnet

  The magnet has several functions. Activation The first time you use your sensor, you need to activate it using the magnet. Place the magnet on the small magnet symbol on the right side of the sensor and hold it there for a few seconds until the ...

• Display Data on an External Screen

  With just a few clicks, the RoomAlyzer system can generate an external link that lets you display selected data wherever you need it — for example, on a tablet or a large screen in the reception area, classroom, meeting room, or office. This allows ...

• Disposal

  If you need to dispose of RoomAlyzer sensors, please follow these steps: RoomAlyzer FULL and RoomAlyzer MINI: Remove the batteries and dispose of them separately at your local battery collection point. The sensor itself should be taken to a recycling ...